Chambers

Home /Chambers

Environmental Test Chamber

Basic Details :
  • capacitive Multi-Touch-Display in the front
  • service-friendly capacitive humidity measurement system
  • defined keys for elementary functions of the installation such as start/stop,
  • fixed-value/automatic operation, interruption, light, etc.
  • USB-Connection to save measuring data on USB Stick
  • Ethernet-Interface / RS232-Interface
  • 2 digital Out, to switch test specimen ON/OFF
  • adjustable software-temperature-limiter min./max.
  • shelf, stainless steel
  • entry port Ø 50 mm on the right side
  • single-hand operated door handle, lockable
Benefits :
  • low consumption data
  • minimum noise level
  • user-friendly operation and programming
  • uniform operation due to identical Multi-Touch-Display for all chamber sizes
  • demineralized water system with level indicator
  • temperature measuring with Pt 100 in air inlet and air outlet
  • service-friendly construction
  • international standards are fulfilled (CE-Conformity)
Test space capacity in litres:
  • 100 / 200 / 350 / 600 / 1000 / 1500 / 2000
Climatic-Chamber2
Basic Equipment :
  • capacitive Multi-Touch-Display in the front
  • defined keys for elementary functions of the installation such as start/stop,fixed-value/automatic operation, interruption, light, etc.
  • USB-Connection to save measuring data on USB Stick
  • Ethernet-Interface / RS232-Interface
  • door with window, incl. LED-light
  • 2 digital Out, to switch test specimen ON/OFF
  • shelf, stainless steel
  • entry port, size depending on chamber type
  • single-hand operated door handle, lockable
  • temperature cycling in cold chamber (32, 66, 130 Litre)
  • eco-mode to save energy costs
  • air dryer system to avoid freezing in long-time testing
Benefits
  • low consumption data
  • Minimum noise level
  • user-friendly operation and programming
  • uniform operation due to identical Multi-Touch-Display for all chamber sizes
  • temperature measuring with Pt 100 in air inlet and air outlet
  • service-friendly construction
  • international standards are fulfilled (CE-Conformity)
  • compact design with small installation area
Test space capacity in litres:
  • 32 / 66 / 130 / 350
Thermal-Shock-Chamber
Basic Equipment :
  • capacitive Multi-Touch-Display in the front
  • service-friendly capacitive humidity measurement system
  • defined keys for elementary functions of the installation such as start/stop,
  • fixed-value/automatic operation, interruption, light, etc.
  • USB-Connection to save measuring data on USB Stick
  • Ethernet-Interface / RS232-Interface
  • 2 digital Out, to switch test specimen ON/OFF
  • adjustable software-temperature-limiter min./max.
  • shelf, stainless steel
  • entry port Ø 50 mm on the right side
  • single-hand operated door handle, lockable
Benefits :
  • low consumption data
  • minimum noise level
  • extremely high temperature change rates
  • user-friendly operation and programming
  • uniform operation due to identical Multi-Touch-Display for all chamber sizes
  • demineralized water system with level indicator
  • temperature measuring with Pt 100 in air inlet and air outlet
  • service-friendly construction
  • international standards are fulfilled (CE-Conformity)
Temperature change rates:
  • 5 K/min, 10 K/min and 15 K/min
Test space capacity in litres:
  • 100 / 200 / 350 / 600 / 1000 / 1500 / 2000
Stress-Screening-Chambers1
Standard version of the product line “CP”:
  • capacitive humidity measuring system
  • casing in stainless-steel
  • door lockable
  • 3 RVS shelves
  • entry port ø 50 mm
  • multicolour touch panel / 32 Bit Controller
  • low noise refrigerating unit
  • potential-free contact for malfunction signal
  • interface RS 232
Benefits :
  • use of environmentally friendly materials and refrigerants
  • own CTS-controller optimized to CTS-systems
  • simple user-friendly operation
  • internal and external material in stainless-steel for easy cleaning
Options :
  • Door with window
Test space capacity in liters :
  • 600 / 1200
Temperature Range :
  • +10 °C / +50 °C
Pharma-Climatic-Chambers
  • Test space capacity: > 2 m3
  • Humidity range:10 – 98 % RH
Temperature Range :
  • -40 °C / +180 °C
  • -70 °C / +180 °C
Options :
  • Light modules
  • Version for corrosion testing
  • Version for airbag shoot
  • Explosion-proof version
  • Version for vibration testing
Walk-in-or-Drive-In-Chamber
Standard version of the product line “TV/CV”:
  • multicolor touch panel / 32 Bit Controller
  • service-friendly capacitive humidity measurement system (CV)
  • single-hand operated door handle, lockable
  • 2 entry port ø 125mm
  • shelf, stainless steel
  • error display in plain text
  • potential free contact for malfunction signal
  • RS 232 interface
  • Vibration Test Cabinets, Series TV/CV
Benefits :
  • service-friendly construction
  • minimum noise level
  • very high temperature change rates
  • simple user-friendly operation and programming
  • low power-consumption datas
  • optimized parameters for highest testing precision
  • complies with current CE and EMC regulation
Vibration-Test-Cabinets1
Specification:
  • Spectrum mis-match: IEC 60904-9 class A
  • Non-uniformity <5%
  • Instability <5% ( within 30 mins)
  • Irradiance range: 800 W/m2 ~ 1200W/m2
  • Effective range: 30cm x 30cm; 1.1m x 1.4m
  • (customize accepatble)
  • Temperature:40℃ ~ 90℃
  • Humidity: 20% ~ 85%
PV-Test-Equipment-Chamber

All tested in empty chamber condition (except indicated), according to GB/T5170-2008 2 Data for air cooling chamber is tested when the room temperature is 25oC, with good ventilation; normal use in the event of room temperature between 25oC and 35oC, with some influences on low-temperature range, cooling down rate and thermal load capacity. 3 Data for water cooling chamber is tested under the conditions that water temperature is no more than 28oC, water pressure is between 0.2MPa and 0.6MPa and the pressure difference between in and out water is no less than 0.2MPa

Solar-Radiation-Test-Chamber

This chamber is suitable for the product (complete machine), parts, materials to perform high temperature storage test.

High-Speed-Raining-Chamber

All new developing products must undergo several strict testing processes while in designing, manufacturing and packing/ shipping even. Our drop tester will provide data digitizing and analyzing of your drop and striking while the products in transportation. The testing data will help you improve the packing and buffer materials.

Packaged drop test is applied to test the anti-vibration & covering capability of packaging material and the sufficiency of product’s impact-resisting capability regarding packaged products. And use the test result to determine how to improve the packaging design. Free drop test is used to assess the characteristics of product’s free fall from improper actions; and evaluate the required strength and toughness of product under safety conditions.

Repeated free fall test is to simulate object’s condition after normal fall to hard surface.

Drop-Tester

Corrosion Chambers

  • Manifold testing options from salt spray tests to fully automated replacement tests
  • Simple operation using graphic menu navigation
  • Customer-specific applications for many exceptional cases
  • Simple operation using a touch panel

Features :

  • Constant deposition amount through dosage pump
  • High value spray nozzle made of PMMA or PVDF
  • Testing chamber made of polypropylene
  • Air humidifier made of stainless steel
  • Frame and extension components consisting of stainless steel (coloured lacquering on request)
  • Transparent cover
  • Computer control using a graphic screen
Salt Spray Boxes
Corrosion test systems as box containers enable optimum usage of space
  • Manifold testing options from salt spray tests to fully automated replacement tests
  • Easy to operate using the graphic menu navigation
  • Customer-specific applications for many special applications
  • Simple operation using a touch panel
Features :
  • Constant deposition amount through dosage pump
  • High value spray nozzle made of PMMA or PVDF
  • Testing chamber made of polypropylene
  • Air humidifier made of stainless steel
  • Frame and extension components consisting of stainless steel (coloured lacquering on request)
  • Glass door
  • Computer control using a graphic screen
salt-spray-container
Characteristics :
  • all dust chambers are in accordance to the most common standards
  • vertical air flow inside the chambers
  • a huge door allows easy handling of the DUT
  • because of a special sealing the chambers are completely tight.
  • a windscreen wiper allows a good view on the DUT during testing
  • the lighting inside the chamber allows a good view on a test item
  • 3 standard dimensions are available ( SK500 / SK1000 /SK2000)
  • the low pressure equipment for IP6X tests belongs to the standard scope of supply
  • the vacuum for the IP6X test is regulated automatically during the complete test
  • the 6,5″ touch panel allows easy operating of the dust chamber
  • data recording of test parameters (for example low pressure and flow rate)
Dust-Chambe

Our corrosive gas tanks allow test results to be easily reproduced through the usage of stainless steel and glass materials

Features :
  • For checks according to ISO 6988 (DIN 50 018)
  • Appropriate for corrosion checks of all materials and surface–covered parts, also especially for plastics
  • Original design made of special stainless steel materials and glass
  • Temperature range from room temperature to 60°C, optionally up to 75°C
  • Depending on the expansion stage, controlled by digital PID control or microcomputer
  • Extremely long life, still almost entirely recyclable
Corrosive-gas-tanks
Characteristics :
  • all test chambers are in accordance to the most common standards
  • the modular construction of the systems enable an easy update of new test procedures
  • the tall doors allow an easy handling with the test items
  • a windscreen wiper allows a good view the test item during the test
  • the lighting inside the chamber also provides a good view on the test item
  • there are 4 standard design sizes available (R200/ R400 / R600 /R800)
  • all system are operated by a robust touch panel
  • the chamber can be operated in a manual mode or automatic mode
  • for the automatic mode it is possible to define own test procedures
  • these test procedures can be loaded and started
  • all measured datas are recorded during a test run.
Water-Spray-Chamber